Hello Guido,
Hope everything ok with you and family!
I have acquired recently the legacy KW16 FLex MOD to drive a 8X8 switch matrix.
I have installed it on a dedicated circuit board and plugged to USB and everything seems OK.
However when I open the KeyWarrior Table program and correspondent new ...
Search found 45 matches
- Thu May 21, 2020 6:30 pm
- Forum: KeyWarrior English
- Topic: KW16 Flex MOD
- Replies: 1
- Views: 8223
- Thu Nov 22, 2018 9:25 pm
- Forum: KeyWarrior English
- Topic: KW 24 USB unknown device
- Replies: 5
- Views: 16452
Re: KW 24 USB unknown device
Yes of course, I work perfectly fine with an IOW40 PCB, and never get warm.
Is it possible to change this product?
Is it possible to change this product?
- Thu Nov 22, 2018 5:02 pm
- Forum: KeyWarrior English
- Topic: KW 24 USB unknown device
- Replies: 5
- Views: 16452
Re: KW 24 USB unknown device
Thanks for your answer,
It does not work in any computer.
I have changed the USB port and do all sort of changes and it does not work.
Besides, the chip seem to be hot when the PCB is connected.
I think it is damaged.
It does not work in any computer.
I have changed the USB port and do all sort of changes and it does not work.
Besides, the chip seem to be hot when the PCB is connected.
I think it is damaged.
- Tue Nov 20, 2018 6:17 pm
- Forum: KeyWarrior English
- Topic: KW 24 USB unknown device
- Replies: 5
- Views: 16452
KW 24 USB unknown device
Hello again!
I am utilizing a KW24 to drive an 8X8 key matrix.
When connecting the PCB with an USB cable to Windows 7 SP1, it appears the message on Device Manager
Device Unknown, windows interrupted the device, Code 43
I have tried several times to update drivers, intall again and so on.
Any ...
I am utilizing a KW24 to drive an 8X8 key matrix.
When connecting the PCB with an USB cable to Windows 7 SP1, it appears the message on Device Manager
Device Unknown, windows interrupted the device, Code 43
I have tried several times to update drivers, intall again and so on.
Any ...
- Mon May 04, 2009 3:57 pm
- Forum: IO-Warrior English
- Topic: IOW40 switch+led
- Replies: 1
- Views: 12672
IOW40 switch+led
Hello all!!
Without using LED-Matrix and Switch-Matrix capabilities from IOW40 chip, just using the 40 basic pins, is it possible to make the following thing:
- When i close a switch a led will go on.
Or by other words, when i put a 1 (closed switch) to a pin on Port-3 can i have an output on ...
Without using LED-Matrix and Switch-Matrix capabilities from IOW40 chip, just using the 40 basic pins, is it possible to make the following thing:
- When i close a switch a led will go on.
Or by other words, when i put a 1 (closed switch) to a pin on Port-3 can i have an output on ...
- Wed Apr 15, 2009 7:25 pm
- Forum: IO-Warrior English
- Topic: Coding with IOW API
- Replies: 0
- Views: 10016
Coding with IOW API
Hello people!!
I need help on programing with IOW40 API.
I´m using MFC C++ to interact with my board and by now i can do some interesting things.
Now i want to program a simple code, using IOW API functions read and write and so on, wich give the ability to my program to detect and configure user ...
I need help on programing with IOW40 API.
I´m using MFC C++ to interact with my board and by now i can do some interesting things.
Now i want to program a simple code, using IOW API functions read and write and so on, wich give the ability to my program to detect and configure user ...
- Tue Jan 27, 2009 3:13 am
- Forum: IO-Warrior English
- Topic: Programing on LED-Matrix
- Replies: 6
- Views: 13564
Re: Programing on LED-Matrix
Ok,
I have told you before i´m not an expert on programing languages.
I have experimented another code and i can switch on-off a single led:
void CInterfaceSystemDlg::OnCHECK1writebit1()
{
// TODO: Add your control notification handler code here
IOWKIT_SPECIAL_REPORT report;
report ...
I have told you before i´m not an expert on programing languages.
I have experimented another code and i can switch on-off a single led:
void CInterfaceSystemDlg::OnCHECK1writebit1()
{
// TODO: Add your control notification handler code here
IOWKIT_SPECIAL_REPORT report;
report ...
- Mon Jan 26, 2009 4:20 pm
- Forum: IO-Warrior English
- Topic: Programing on LED-Matrix
- Replies: 6
- Views: 13564
Re: Programing on LED-Matrix
Ok thanks i understood,
memset is not the "point" i need! Please can you give me an example (with C++ code) to set an individual led ON, on a matrix of 8X8?
Actually i can do that, but using memset on this code:
void CInterfaceSystemDlg::OnCHECK1writebit1()
{
// TODO: Add your control ...
memset is not the "point" i need! Please can you give me an example (with C++ code) to set an individual led ON, on a matrix of 8X8?
Actually i can do that, but using memset on this code:
void CInterfaceSystemDlg::OnCHECK1writebit1()
{
// TODO: Add your control ...
- Mon Jan 26, 2009 1:48 pm
- Forum: IO-Warrior English
- Topic: Programing on LED-Matrix
- Replies: 6
- Views: 13564
Programing on LED-Matrix
Hi Good-Day,
I want to have on my code a function to switch on-off all the single led´s on my LED-Matrix, wich is actually an 8X8 matrix.
Can you explain what does it mean this single line on the code:
memset(&report, 0xff, IOWKIT_SPECIAL_REPORT_SIZE);
When i run the program with 0xff all the ...
I want to have on my code a function to switch on-off all the single led´s on my LED-Matrix, wich is actually an 8X8 matrix.
Can you explain what does it mean this single line on the code:
memset(&report, 0xff, IOWKIT_SPECIAL_REPORT_SIZE);
When i run the program with 0xff all the ...
- Fri Jan 23, 2009 7:58 pm
- Forum: IO-Warrior English
- Topic: Calling IowKitGetSerialNumber!!
- Replies: 11
- Views: 20247
Re: Calling IowKitGetSerialNumber!!
Ok, checked!
More 2 questions:
1 - Is it possible to have special mode functions Led-Matrix and Switch-Matrix operating at the same time?
2 - I know the API dont have support for plug/unplug but is there a way to refresh or make the reset of the program instead we have to close it and re-open if ...
More 2 questions:
1 - Is it possible to have special mode functions Led-Matrix and Switch-Matrix operating at the same time?
2 - I know the API dont have support for plug/unplug but is there a way to refresh or make the reset of the program instead we have to close it and re-open if ...
- Thu Jan 15, 2009 2:22 pm
- Forum: IO-Warrior English
- Topic: Calling IowKitGetSerialNumber!!
- Replies: 11
- Views: 20247
Re: Calling IowKitGetSerialNumber!!
Hello,
Thanks Christoph, your advises was very useful to "clean" my code.
But i´ve a few more questions...
1- How can i use function IowKitReadImmediate() to display the IO pins values, for example in an Edit Box? I´m just getting 0 or 1´s with this code:
void CInterfaceSystemDlg::OnRead ...
Thanks Christoph, your advises was very useful to "clean" my code.
But i´ve a few more questions...
1- How can i use function IowKitReadImmediate() to display the IO pins values, for example in an Edit Box? I´m just getting 0 or 1´s with this code:
void CInterfaceSystemDlg::OnRead ...
- Tue Jan 13, 2009 2:59 pm
- Forum: IO-Warrior English
- Topic: Calling IowKitGetSerialNumber!!
- Replies: 11
- Views: 20247
Re: Calling IowKitGetSerialNumber!!
Ok,
I´ve send you my project, thanks!
MS
I´ve send you my project, thanks!
MS
- Tue Jan 13, 2009 2:17 pm
- Forum: IO-Warrior English
- Topic: Calling IowKitGetSerialNumber!!
- Replies: 11
- Views: 20247
Re: Calling IowKitGetSerialNumber!!
Hi again,
Thanks Christoph, your advise to not use ioHandle several times along the program was very useful because i could save a lot of warnings from the compiler. :)
The bad news are the assert failure doesn´t go away!! And i´ve tried with the 2 examples you have show, with the static text and ...
Thanks Christoph, your advise to not use ioHandle several times along the program was very useful because i could save a lot of warnings from the compiler. :)
The bad news are the assert failure doesn´t go away!! And i´ve tried with the 2 examples you have show, with the static text and ...
- Mon Jan 12, 2009 1:26 pm
- Forum: IO-Warrior English
- Topic: Calling IowKitGetSerialNumber!!
- Replies: 11
- Views: 20247
Re: Calling IowKitGetSerialNumber!!
Hi, first of all, thanks Christoph for your prompt reply!
I´ve called IowKitOpenDevice() on the section //TODO add extra initialization code. I think this is enough or i must call the function several times as it comes necessary like in this situation?
I´ve done copy/paste your code for my .cpp ...
I´ve called IowKitOpenDevice() on the section //TODO add extra initialization code. I think this is enough or i must call the function several times as it comes necessary like in this situation?
I´ve done copy/paste your code for my .cpp ...
- Sun Jan 11, 2009 1:43 pm
- Forum: IO-Warrior English
- Topic: Calling IowKitGetSerialNumber!!
- Replies: 11
- Views: 20247
Calling IowKitGetSerialNumber!!
Hi all,
I´m writing my own program to talk with IOW40 in MFC Visual C++ 6.0.
Until now i´me made a few things but they are working well.
But i cant find any way to fill an Edit Box on MFC with the Serial Number string of IOW40.
The code i´ve writed is:
void CInterfaceSystemDlg ...
I´m writing my own program to talk with IOW40 in MFC Visual C++ 6.0.
Until now i´me made a few things but they are working well.
But i cant find any way to fill an Edit Box on MFC with the Serial Number string of IOW40.
The code i´ve writed is:
void CInterfaceSystemDlg ...