CodeMercs Forum

:shock: No one has said its the joystick, No one will say anything. I use two flight sims and its the same in both. Were pushin data here, not flying planes. I hoped you might point me in a direction to look. Just trying to understand. :( tyvm 4 ur time I understand its not what this forum is for, y...

:lol: Ok, I think I understand you. One more scenario. A group of online planes take off, they have same plane choice settings, ie fuel loadout, aircraft trim tabs are same, all is same. No turns every virtual plane flies straight like a drag race, level flight no turns. I am in the lead for a time,...

:lol: Hi Guido, OK, I think I understand your point. I'm still learning tho. The original JoyWarrior mods were 8 bit and were USB 1.0 with a transfer rate of 12 Mb/s, yes? Your new versions of the modules are 10 bit and are USB 2.0 with a transfer rate of 400 Mb/s, yes? I understand about the hand-e...

:)
Did you ever find where to get pots that use smaller elec angles? I did not.
Still useing the spitfire style stick, but I got a gameport to USB adapter, which did improve the performance a little. Still useing a 250 k ohm pot on the X-axis.

8) Hello Guido, Remember me, a successful user of your product. Yes, I am still useing my homemade flight gear, powered by your products. You seem to have some new modules. IF I am reading correctly, you now have a 10 bit, 3 axis version of the JoyWarrior? A-8, A-16 Can I get these in the states yet...

Guido my friend, I did that very thing, surfed like a mad man. 270 degree ( single turn )was all I could find. Its like thier not available unless you order specific like, could find nothing off the shelf. Even my rudder pedal does not use 60% of the pot, I added a switch at the jumper 1 port, lifte...

Can the modules be made to work with a 250K ohm pot? I know as they are now they won't, but can you do something on your end to widen the range? This way smaller degrees of mechanical movement can cover the 0 > 100K ohm electrical range, beats using gears!
TY

Hey,
Broken wire was problem, I had scavenged and old rj 45 cable oops!

So, I'm using a copy of DXTweak2 to define the middle and end point numbers for the pots, so I have a little control. I set something up and went to game. After a short while the pot changes performance. On both ends of the spectrum, the same number pops up. In between the two points, it increases a...

:D cool,
TY

8) Hey G,
I actually replaced the pot, resoldered the connects. Its almost like when you are not using enuf of the pots mechanical range, except that I am in this case. It had been working, it changed in game. Will shorts in the button matrix affect the pot circuitry?
TY

2nd ? bro, I am useing three separate devices to play the game. Is it possible to have to many devices connected at once? ( Gameport, A-16, A-8 ) P4 3.06 mz HT enabled ATI X1600 AGP video card w/ 512 mb ram 1 gig 1066 RDRAM 1gig page file mem I'm just trying to track done an intermittant game issue....

Hey Guido, Discussing the JoyWarrior A-16 mod. My throttle unit uses 16 buttons and the z axis connection. It had been working fine till last nite. Now there is a deadspot, it is not the pot I changed it. It goes from approx. 156 - 200. This corrresponds to the 0 rpm - 200 rpm range. Low end of the ...

:D Just a hello, I have not posted for awhile. FYI Currentlly using my home brew creations. I have a 16 button, 1 pot throttle unit that stands alone, powered by CodeMercs. I have and 8 button, 1 pot rudder unit that stands alone, powered by CodeMercs. Worked out my earlier problems by putting the d...

I,ve taken a 25 pin printer cable and canablized it. This particular grouping of buttons is using the larger guage wires in the bundle. Are you saying that the magnetic field created by the larger guage wires might be the bleed thru issue?
ty