All pins high

This is the English forum for all topics related to IO-Warrior. Please post in English only

Moderator: Guido Körber

Post Reply
forde52
Posts: 2
Joined: Sun May 04, 2014 1:27 am

All pins high

Post by forde52 »

Hi guys

I got an IO-Warrior 56 a month or two back for use with 'mAirList' and have only just got round to using it.
Here's my problem, when I plugged it into the computer and opened up mAirList, it was showing up as an IO-Warrior 64, and all of the pins (apart from 29 and 30) are giving me a high signal (5.04V).

Is this supposed to happen or is there a problem with the chip?

Thanks in advance!

Guido Körber
Site Admin
Posts: 2762
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

Re: All pins high

Post by Guido Körber »

This is how it should behave.

forde52
Posts: 2
Joined: Sun May 04, 2014 1:27 am

Re: All pins high

Post by forde52 »

Ah right ok!

That's good news, I thought it was broken for a moment then!

Thanks for your reply! :)

Post Reply