Cable terminology

This is the English forum for all topics related to IO-Warrior. Please post in English only

Moderator: Guido Körber

Post Reply
Ainniseoir
Posts: 2
Joined: Thu Apr 23, 2015 9:57 am

Cable terminology

Post by Ainniseoir »

I would be obliged if anybody who has connected a LCD module to an IO-warrior 24 (built from starter kit) let me have the appropriate terminology for that item.
A manufacturer's name would be even better!
Thanks in advance.

Guido Körber
Site Admin
Posts: 2762
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

Re: Cable terminology

Post by Guido Körber »

It is a flat ribbon cable. You can get them by the meter or already equipped with flat ribbon connectors. There are tons of manufacturers.

Check out the usual suspects like Mouser, DigiKey, Farnell etc. you might even be able to find then on eBay. You will need one with 16 pins for the IOW24KIT. The display side depends on the actual display you are using, they come with all kinds of pinouts.

Ainniseoir
Posts: 2
Joined: Thu Apr 23, 2015 9:57 am

Re: Cable terminology

Post by Ainniseoir »

Thank you!
Delighted with that information.

Post Reply