RawWrite error: Not 8 bytes: 0 - Labview error

This is the English forum for all topics related to IO-Warrior. Please post in English only

Moderator: Guido Körber

Post Reply
henk
Posts: 3
Joined: Fri Aug 21, 2015 1:58 pm

RawWrite error: Not 8 bytes: 0 - Labview error

Post by henk »

Hi all,
I am using IOW24 dongle and I am trying to read out the I2C data from a flowsensor. However, when I use the I2Cread_all.vi I keep getting the following error message:

IOWarrior_IIC_Read_All.vi > IOWarrior_Special_Rawwrite.vi:5910001: IOWarrior RawWrite error: Not 8 bytes: 0

Has this happened to anyone else? And does somebody know a solution for this?

My thanks in advance and best regards to you

User avatar
Christoph Jung
Posts: 628
Joined: Sun Oct 08, 2006 3:43 pm
Location: Germany / Berlin
Contact:

Re: RawWrite error: Not 8 bytes: 0 - Labview error

Post by Christoph Jung »

Have you check the samples for LabView in our download section?
Abteilung: Softwareentwicklung
Folge uns auf Twitter
Follow us on twitter

henk
Posts: 3
Joined: Fri Aug 21, 2015 1:58 pm

Re: RawWrite error: Not 8 bytes: 0 - Labview error

Post by henk »

Thanks for the reply!

I used the IOWarrior V150.llb and I assumed this was the latest version. I was newly assigned to this and so it was already downloaded to the computer.
I will check the download page for some oher examples.

User avatar
Christoph Jung
Posts: 628
Joined: Sun Oct 08, 2006 3:43 pm
Location: Germany / Berlin
Contact:

Re: RawWrite error: Not 8 bytes: 0 - Labview error

Post by Christoph Jung »

Maybe you can send me your VI then I will take a look (please for LabView 11)
Abteilung: Softwareentwicklung
Folge uns auf Twitter
Follow us on twitter

henk
Posts: 3
Joined: Fri Aug 21, 2015 1:58 pm

Re: RawWrite error: Not 8 bytes: 0 - Labview error

Post by henk »

The V150.llb does not work on Labview 11 I think, but I have an older version which looks the same and works on Labview 12, so hopefully on 11 also. It was not my own .vi, it was included already. It was called: IOWarrior_IIC_Read_All.vi. To what mail address should I send it btw? or is there an option to upload the file to this forum section?

User avatar
Christoph Jung
Posts: 628
Joined: Sun Oct 08, 2006 3:43 pm
Location: Germany / Berlin
Contact:

Re: RawWrite error: Not 8 bytes: 0 - Labview error

Post by Christoph Jung »

The V150.llb works on LabView 11, I use this version for development.
I need a VI-File for LabView 11 or earlier.

Mail-Address: jung@codemercs.com
Abteilung: Softwareentwicklung
Folge uns auf Twitter
Follow us on twitter

Post Reply