Page 1 of 1

DALI - totally simple

Posted: Fri Jun 21, 2013 3:17 pm
by Guido K├Ârber
Here is how easy it is to build a DALI compatible LED lamp:
LW0705.jpeg
LW0705.jpeg (99.39 KiB) Viewed 11696 times
We simply connected a LED-Warrior05-350 with a Cree MX-6 LED (one to five LEDs are possible in this configuration) to a LED-Warrior07-MOD. That is all it needs to make a DALI LED lamp.

The two black wires in the lower right are the DALI-Bus, red and black in the upper left go to a 24 V power supply.

Of course the LED-Warrior07 module can be connected to other LED drivers with PWM input.