DALI even simpler

English posts only please

Moderator: Guido Körber

Post Reply
Guido Körber
Site Admin
Posts: 2763
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

DALI even simpler

Post by Guido Körber »

We are now shipping the LED-Warrior07-02MOD. It directly drives constant voltage LED modules, strips, and replacement bulbs. At voltages between 5.5V and 45V it can drive up to 4 A. Attached between the LED power supply and the LED it easily turns constant voltage installations into DALI luminaires.

Here is an example from our lab. The red wires running below the module are the DALI bus. At the other end 12V from the power supply are connected and the negative end of the LED strip connects to the output of the LED-Warrior07-02MOD. This is all you need to make your LED strip DALI compatible.
Attachments
LW0702.jpg
LW0702.jpg (95.24 KiB) Viewed 9500 times

Post Reply