Not reading Joystick output at 125 Hz but 64 Hz
Moderator: Guido Körber
Not reading Joystick output at 125 Hz but 64 Hz
When reading the axis-data as if it was a simple Joystick I get a sample per 0.015 or 0.016 seconds ; this is wierd (~64Hz). Is it because I don't use the HID method?
Re: Not reading Joystick output at 125 Hz but 64 Hz
Ok, I'll reply to myself :
The time resolution I had were due to limitations of the python "datetime" module. It blocks around 60Hz. Now, using the time.clock module, I can see finer resolution.
The time resolution I had were due to limitations of the python "datetime" module. It blocks around 60Hz. Now, using the time.clock module, I can see finer resolution.