- LW0705.jpeg (99.39 KiB) Viewed 12463 times
The two black wires in the lower right are the DALI-Bus, red and black in the upper left go to a 24 V power supply.
Of course the LED-Warrior07 module can be connected to other LED drivers with PWM input.
DALI - totally simple
Moderator: Guido Körber
-
Guido Körber
- Site Admin
- Posts: 2818
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact:
DALI - totally simple
Here is how easy it is to build a DALI compatible LED lamp:
We simply connected a LED-Warrior05-350 with a Cree MX-6 LED (one to five LEDs are possible in this configuration) to a LED-Warrior07-MOD. That is all it needs to make a DALI LED lamp.
The two black wires in the lower right are the DALI-Bus, red and black in the upper left go to a 24 V power supply.
Of course the LED-Warrior07 module can be connected to other LED drivers with PWM input.
We simply connected a LED-Warrior05-350 with a Cree MX-6 LED (one to five LEDs are possible in this configuration) to a LED-Warrior07-MOD. That is all it needs to make a DALI LED lamp.
The two black wires in the lower right are the DALI-Bus, red and black in the upper left go to a 24 V power supply.
Of course the LED-Warrior07 module can be connected to other LED drivers with PWM input.