New to Codemercs - Can JW be used with Toggle switches?
Moderator: Guido Körber
-
- Posts: 4
- Joined: Thu May 28, 2009 7:20 am
- Location: Australia
New to Codemercs - Can JW be used with Toggle switches?
I am new to Codemercs. Can Joy Warrior inputs be used with toggle (On/Off) or only Momentary switches?
-
- Site Admin
- Posts: 2857
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact:
Re: New to Codemercs - Can JW be used with Toggle switches?
The JoyWarrior does not care how the switch is built, it just reports the status on its inputs. So the answer is yes, toggle switches can be used.
-
- Posts: 4
- Joined: Thu May 28, 2009 7:20 am
- Location: Australia
Re: New to Codemercs - Can JW be used with Toggle switches?
Is this so for both direct connection and using a switch matrix. I would be using JoyWarrior24 GP 32 for inputs to Microsoft Flight Simulator X, and require several inputs to be on simultaneosly, without generating phantom key inputs.
-
- Site Admin
- Posts: 2857
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact:
Re: New to Codemercs - Can JW be used with Toggle switches?
Phantom keys are different thing, if you close three or matrix points you can have phantoms unless you have diodes in the matrix.
-
- Posts: 4
- Joined: Thu May 28, 2009 7:20 am
- Location: Australia
Re: New to Codemercs - Can JW be used with Toggle switches?
Using diodes, is there still a limitation as to how many simultaeous inputs can be handled?
-
- Site Admin
- Posts: 2857
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact: