Do you know a USB component for Delphi 6 ? I want to perform a communication between a microcontroller with USB and a computer.,
Thanks
Paulo
USB Delphi Component
Moderator: Guido Körber
-
- Site Admin
- Posts: 2856
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact:
-
- Posts: 543
- Joined: Mon Dec 01, 2003 6:09 pm
There is no general purpose component possible.
Only the HID subclass of USB is accessible through my HID component which is also enclosed in the IOWKIT SDK.
Most classes of USB devices have a class driver in the common OSes.
Usually the device is then accessed through an API which is not USB specific at all.
An USB stick for example is a mass storage device and is accessed through the normal file system API aka file access.
Only the HID subclass of USB is accessible through my HID component which is also enclosed in the IOWKIT SDK.
Most classes of USB devices have a class driver in the common OSes.
Usually the device is then accessed through an API which is not USB specific at all.
An USB stick for example is a mass storage device and is accessed through the normal file system API aka file access.
-
- Posts: 1
- Joined: Sun Mar 26, 2006 9:13 pm
Hello,
we have a toolkit RapidDriver, intended especially for that purposes. You can download it at:
http://www.entechtaiwan.com/dev/rapid
we have a toolkit RapidDriver, intended especially for that purposes. You can download it at:
http://www.entechtaiwan.com/dev/rapid
-
- Posts: 543
- Joined: Mon Dec 01, 2003 6:09 pm
Use the SetFeature method. It works about the same as the WriteFile method.
The parameters are the report and the size of the report in bytes.
The feature report itself has of course to be declared in the report descriptor of the device.
I definitely know that it works. The KeyWarrior chips use a feature report to write the key table. The table writer app uses of course the HID component.
The parameters are the report and the size of the report in bytes.
The feature report itself has of course to be declared in the report descriptor of the device.
I definitely know that it works. The KeyWarrior chips use a feature report to write the key table. The table writer app uses of course the HID component.
-
- Site Admin
- Posts: 2856
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact: