Search found 4 matches

by Alfredo
Tue Feb 10, 2009 9:25 am
Forum: JoyWarrior English
Topic: JoyWarrior24F8 reports wrong Y angle with Tiltsensor
Replies: 9
Views: 21476

Re: JoyWarrior24F8 reports wrong Y angle with Tiltsensor

I am not sure that I understand your question, Christoph. I own two Jw24F8: one is the qcn kit that I bought from you. I have calibrated it with the calibration tool and this one works well and is now dedicated to the qcn network. I then bought a second one: and this is the one that initially worked...
by Alfredo
Mon Feb 09, 2009 5:49 pm
Forum: JoyWarrior English
Topic: JoyWarrior24F8 reports wrong Y angle with Tiltsensor
Replies: 9
Views: 21476

Re: JoyWarrior24F8 reports wrong Y angle with Tiltsensor

Cristoph,
here are the values that I get using your jw24f8info program:

Range: +/- 2G
Bandwith: 50Hz

Offset Gain

X 0x312 0x02C

Y 0x28D 0x001

Z 0x296 0x02D
by Alfredo
Fri Feb 06, 2009 6:08 pm
Forum: JoyWarrior English
Topic: JoyWarrior24F8 reports wrong Y angle with Tiltsensor
Replies: 9
Views: 21476

Re: JoyWarrior24F8 reports wrong Y angle with Tiltsensor

Thank you Cristoph and Guido for your suggestions but my problem is still there: with tiltsensor the range of the Y axis is limited between 0 (horizontal) and 26° (vertical) and the readings span from 0 to a maximum of 112. The X axis is ok ranging from 0 to 90° and also the Z axis looks ok with rea...
by Alfredo
Thu Feb 05, 2009 5:35 pm
Forum: JoyWarrior English
Topic: JoyWarrior24F8 reports wrong Y angle with Tiltsensor
Replies: 9
Views: 21476

JoyWarrior24F8 reports wrong Y angle with Tiltsensor

I have purchased a Joywarrior24F8 accelerometer and I tested the angles with your program Tiltsensor.exe. Everything was fine, in particular when the Y axis was flat horizontal I got a reading of 000 and 0.02°, and when vertical the reading was 256 and 89° approximately. Then I tried your program Ca...