Search found 4 matches
- Wed Nov 07, 2012 8:39 pm
- Forum: JoyWarrior English
- Topic: HID reading freq
- Replies: 2
- Views: 11733
Re: HID reading freq
I use fedora 17 and libusb for reading the HID interface on a usb2.0 host. I had a problem at first and the code would halt, as I now understand from your reply, due to the speed limitation. The solution was to clear the halt (libusb_clear_halt command) and read the new report. I get good readings w...
- Wed Nov 07, 2012 10:54 am
- Forum: JoyWarrior English
- Topic: HID reading freq
- Replies: 2
- Views: 11733
HID reading freq
I read in this forum that the limit for reading samples from the JoyWarrior24F14 is 125Hz, but is this true for reading also from HID interface? I used my code posted here: http://forum.codemercs.com/viewtopic.php?f=3&t=1693 and it reads the HID at about 339 Hz with no repeat values. can anyone ...
- Tue Nov 06, 2012 6:16 pm
- Forum: JoyWarrior English
- Topic: Read/write jw24f14 hid
- Replies: 3
- Views: 17134
Re: Read/write jw24f14 hid
I managed to write a c code for Linux that communicates with JoyWarrior24F14 via HID.
Feel free to use on your own risk.
It is in a working process so not all functionality is done.
in order to use it you must run as root or adjust udev rules.
Feel free to use on your own risk.
It is in a working process so not all functionality is done.
in order to use it you must run as root or adjust udev rules.
- Tue Jul 31, 2012 11:40 am
- Forum: JoyWarrior English
- Topic: Read/write jw24f14 hid
- Replies: 3
- Views: 17134
Read/write jw24f14 hid
Hello, I'm trying to write a python/c code to read the JW24f14 data and control the range/band options. I try to use the usblib to communicate with the hid interface as describe in chapter 5.5 in the datasheet: http://www.codemercs.com/uploads/tx_sbdownloader/JW24F_Datasheet_01.pdf I couldn't unders...