Switch Matrix Hardware

This is the English forum for all topics related to IO-Warrior. Please post in English only

Moderator: Guido Körber

Post Reply
pcrichton
Posts: 13
Joined: Thu Jun 18, 2009 5:21 pm

Switch Matrix Hardware

Post by pcrichton »

Hi there, can anyone give me an explanation as to how the x and y ports are connected to the physical switches when the IO Warrior is used in switch matrix mode as I am struggling to understand it from reading the data sheet. If someone could give an example of a circuit diagram of say a 2 x 2 matrix of the switches connected up with the diodes, using for example x0..x1 and y0..y1, that would help me a lot. Thanks in advance,

Paul.
Guido Körber
Site Admin
Posts: 2856
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

Switch Matrix Hardware

Post by Guido Körber »

here...
You do not have the required permissions to view the files attached to this post.
pcrichton
Posts: 13
Joined: Thu Jun 18, 2009 5:21 pm

Re: Switch Matrix

Post by pcrichton »

Apologies, but the message within the post you sent says:

"You do not have the required permissions to view the files attached to this post."

I am assuming that this was supposed to be a link, and due to my permission level I cannot view it?

Paul.
Guido Körber
Site Admin
Posts: 2856
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

Re: Switch Matrix Hardware

Post by Guido Körber »

It should work now
Mike D
Posts: 91
Joined: Wed Jun 02, 2004 4:07 pm
Location: Elbe- Weser-Dreieck
Contact:

Re: Switch Matrix Hardware

Post by Mike D »

no, it does'nt work now
pcrichton
Posts: 13
Joined: Thu Jun 18, 2009 5:21 pm

Re: Switch Matrix Hardware

Post by pcrichton »

Yeah it still doesn't seem to be working.
Guido Körber
Site Admin
Posts: 2856
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

Re: Switch Matrix Hardware

Post by Guido Körber »

Now...

For some obscure reason the forum permissions were set wrong only for the English IO-Warrior forum.
pcrichton
Posts: 13
Joined: Thu Jun 18, 2009 5:21 pm

Re: Switch Matrix Hardware

Post by pcrichton »

Much appreciated, thanks.
Post Reply