IO-Warrior and Pots

This is the English forum for all topics related to IO-Warrior. Please post in English only

Moderator: Guido Körber

Post Reply
Kedengar
Posts: 1
Joined: Sat May 27, 2006 3:09 am

IO-Warrior and Pots

Post by Kedengar »

So, I've stumbled across this great product and I was wondering if those of you who have been working with the IO-Warrior for a while wouldn't mind answering a few questions that I have. Alright, here it goes...

I would like to set up a device that has 16 pots, and 16 momentary switches connected to it. Is this possible using the 32 IO pins on the IO-Warrior ? Any information you could provide me with would be greatly appreciated.

Thanks,
Chris
Guido Körber
Site Admin
Posts: 2856
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

Post by Guido Körber »

The switches are no problem, but IO-Warrior has no analog inputs. To connect pots you will need to add an external A/D converter. It is possible to do this via IIC.
Post Reply