JoyWarrior as seismic?

This is the English forum for all topics related to JoyWarrior. Please post in English only

Moderator: Guido Körber

Post Reply
IngemarS
Posts: 2
Joined: Thu May 06, 2010 3:00 pm

JoyWarrior as seismic?

Post by IngemarS »

I live at 63.9N 15.8 E, so not really an earth quake area, but sometimes there 2.1-2.2 or lower.

I have seen the Quake-Catcher but that down not allow for so 'timid' earthquakes, probably at least 200 km 140 miles away.

It should be possible to use the sensor equipment from you in the Quake Catch Network.

I cannot from what is listed on your site (CodeMercs.com) find out what I need to get the hardware, kit preferably, I like soldering... I have PCs with USB ports. W/XP W/Vista W7...

So, what can you recommend?

Regards,

IngemarS
Guido Körber
Site Admin
Posts: 2766
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

Re: JoyWarrior as seismic?

Post by Guido Körber »

The QuakeCatcherKit would be what you need.

There will be anoter variant of the QCKIT in early June which has higher sensitivity.
IngemarS
Posts: 2
Joined: Thu May 06, 2010 3:00 pm

Re: JoyWarrior as seismic?

Post by IngemarS »

Thanks!

I'll make an order, right away, for the "old" type. I might be able to use the "old" type for other purposes, later on...

If your products are good ;-) you will have a returning customer...

[What I would like is better detail in any specifications - which I haven't found ...]

IngemarS
Guido Körber
Site Admin
Posts: 2766
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

Re: JoyWarrior as seismic?

Post by Guido Körber »

Which details?
Post Reply