Information on the JW24F8 and 24f14 programming tools

This is the English forum for all topics related to JoyWarrior. Please post in English only

Moderator: Guido Körber

Post Reply
gm3eiy
Posts: 2
Joined: Thu Aug 04, 2011 8:57 pm

Information on the JW24F8 and 24f14 programming tools

Post by gm3eiy »

Hello Everyone,
New to this board and now the team have sorted me out!! ( I could not login) thanks Guys.
Has anyone any details of how to use the programming tools provided for these devices. I.E. what do the registers do ?
what are the custom bytes on the 24f14.
I am curious, I have looked at some of the code but not a C++ or delphi programmer, just raw code at processor level.
I have sucessfully used 12 and 18 series pics to drive various projects, morse keyer etc.

TIA everyone and thanks again to webmaster and sales group for their assistance

Mike
GM3EIY
Guido Körber
Site Admin
Posts: 2766
Joined: Tue Nov 25, 2003 10:25 pm
Location: Germany/Berlin
Contact:

Re: Information on the JW24F8 and 24f14 programming tools

Post by Guido Körber »

The two custom bytes on both sensors are just persistent store in the sensor chips, you can use them for anything you might want to store in your sensor.

The registers on the F8 allow you to set parameters for detecting shocks or free fall during suspend mode and wake up the computer.
gm3eiy
Posts: 2
Joined: Thu Aug 04, 2011 8:57 pm

Re: Information on the JW24F8 and 24f14 programming tools

Post by gm3eiy »

Thanks Guido,


Mike
GM3EIY/VP8DIA
Post Reply