JW20A8-10
Moderator: Guido Körber
-
VidGameKing
- Posts: 1
- Joined: Mon Feb 13, 2006 11:04 pm
JW20A8-10
Hello there I have a JW20A8-10 mounted on a PCB that is marked 3G1391 I'm looking to make a controler for an arcade pc. I'll need at least 26 buttons. Will this work for that project? I've also got an I/O Warrior 40 aparently it can cope with up to 64 buttons. is that a better route?
-
Guido Körber
- Site Admin
- Posts: 2856
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact:
There is no JW20A8-10 chip. Likely you have a JW20A8-16 and this would be able to control 16 buttons.
The IO-Warrior is no game controller, it requires software that controls it. So neither is a good solution if your design goal is to have 26 buttons work as game input.
Have you taken a look at the JW32GP32?
The IO-Warrior is no game controller, it requires software that controls it. So neither is a good solution if your design goal is to have 26 buttons work as game input.
Have you taken a look at the JW32GP32?