I want to increase the number of outputs and combine two microcircuits on one board.
Here is my diagram.
Is this possible?
Will a mechanical relay work correctly in such a circuit?
Thank you.
Scheme for two LED-Warrior12
Moderator: Guido Körber
-
- Posts: 5
- Joined: Mon Dec 20, 2021 8:25 am
Scheme for two LED-Warrior12
- Attachments
-
- LW12.jpg (118.23 KiB) Viewed 3139 times
-
- Site Admin
- Posts: 2856
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact:
Re: Scheme for two LED-Warrior12
Yes this does work, you don't even need to double the R4 and R6.
Driving the relays should work if you are going only to zero or full output. The relay will have no chance to follow the 730 Hz PWM.
Driving the relays should work if you are going only to zero or full output. The relay will have no chance to follow the 730 Hz PWM.
-
- Posts: 5
- Joined: Mon Dec 20, 2021 8:25 am
Re: Scheme for two LED-Warrior12
Thank you very much for your prompt reply.