Hi, we are trying to retrieve the 3 axis acceleration values (real time m/s², not the tilt...) for the JW24F8/MOD, but with no success.
Is there any example codes for C++ Builder, or a description of cmd / mapping to get this ?
(We are able to read the tilt).
Thanks
Cedric
Acceleration with 24F8
Moderator: Guido Körber
-
- Site Admin
- Posts: 2856
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact:
Re: Acceleration with 24F8
I assume you mean that you want to eliminate the gravity from the acceleration values?
If you have a fixed orientation for the sensor you can simply subtract 1g from the vertical axis. If the orientation of the sensor changes significantly this can get very complex.
Here is a description of how to do this compensation:
http://cdn.intechopen.com/pdfs/8/InTech ... ensors.pdf
If you have a fixed orientation for the sensor you can simply subtract 1g from the vertical axis. If the orientation of the sensor changes significantly this can get very complex.
Here is a description of how to do this compensation:
http://cdn.intechopen.com/pdfs/8/InTech ... ensors.pdf