Hi guys
I got an IO-Warrior 56 a month or two back for use with 'mAirList' and have only just got round to using it.
Here's my problem, when I plugged it into the computer and opened up mAirList, it was showing up as an IO-Warrior 64, and all of the pins (apart from 29 and 30) are giving me a high signal (5.04V).
Is this supposed to happen or is there a problem with the chip?
Thanks in advance!
All pins high
Moderator: Guido Körber
-
- Site Admin
- Posts: 2856
- Joined: Tue Nov 25, 2003 10:25 pm
- Location: Germany/Berlin
- Contact:
Re: All pins high
This is how it should behave.
Re: All pins high
Ah right ok!
That's good news, I thought it was broken for a moment then!
Thanks for your reply! :)
That's good news, I thought it was broken for a moment then!
Thanks for your reply! :)